Can I use SigmaTel STMP 3650 kit firmware code on other devices?

I know little about MCUs and embedded systems.

A year ago we made contract with a company to design a special purpuse MP4 device based on the SigmaTel S开发者_Go百科TMP 3650 kit. Now we have all the source code for the firmware (code, resource around 1G).

My questions are

• Can we use this code to run on other STMP 3xxx famliy based devices (with acceptable modification, of course)? What about other ARM9 based devices?

---

ARM9 defines the processor core (but even then there are variants; yours being ARM962EJ-S), but most on-chip peripherals and support hardware including clocks, PLLs, and interrupt controller are vendor specific, you you would have to port your hardware initialisation and device driver code, and make sure that you choose a device with a comparable peripherals set to the ones your current code uses.

Moreover if the code is written in C or C++ rather than assembler, much of it may be prtable to other architectures, particularly if the application layer and hardware abstraction layer are well defined.

Another issue may be whether your existing implementation relies on any particular OS or RTOS; you may need to select a device that supports the same OS in order to reduce the porting effort.

Finally, a non-programming point, but just to keep you out of trouble; you need to be sure that you own the rights to the code you intend to reuse, and that the original client has no claim on it.

---

your logical successor chip is iMX233 from Freescale for a couple of reasons.

STMP3650 lead to STMP3780 by SigmaTel - same CPU core (ARM9EJ-S), mostly same architecture and registers. Then, SigmaTel was sold to Freescale and they simply copied STMP3780 to ...iMX233. Identical silicon.

We have a fully fledged MP3/MP4 player based on STMP3650 (see bones.ch website) and transfer our R&D now to iMX233. What is your project doing by now? How "good" was the design based on STMP3650 running? Do you have any chip stock left?