Algorithm to determine fundamental frequency from potential harmonics_问答_开发者

I am attempting to extract a fundamental frequency from a sound source. maybe someone is singing A3 into the microphone, so I want to be detecting ~ 110Hz

my approach is:

FFT 1024 floats
use the phase of each bin to accurately determine its precise frequency
determine peaks (typically 50 or so)
order them with the loudest first

(Peak[0].power=1063.343750, .freq=2032.715088

(Peak[1].power=1047.764893, .freq=3070.605225

(Peak[2].power=1014.986877, .freq=5925.878418

(Peak[3].power=1011.707825, .freq=6963.769043

(Peak[4].power=1009.152954, .freq=4022.363037

(Peak[5].po开发者_Go百科wer=995.199585, .freq=4974.120605

(Peak[6].power=987.243713, .freq=8087.792480

(Peak[7].power=533.514832, .freq=908.691833

(MARKER1) start with the loudest, and match it against all remaining peaks, so if I had N peaks, I will have at this point N-1 peak-pairs
examine each peak-pair for harmonicity; ie how close is it to some fraction a/b, ie can we find a/b with b<20 such that |peakA.freq/peakB.freq - a/b| < 0.01 (this would match harmonics up to the 20th one)
we now have a refined list of peaks that are considered harmonic with one another

Harmonic PeakPair: (0,1)=2/3, error:0.00468 => f0 @ 1019.946289
Harmonic PeakPair: (0,2)=1/3, error:0.00969 => f0 @ 2004.003906
Harmonic PeakPair: (0,3)=2/7, error:0.00618 => f0 @ 1005.590820
Harmonic PeakPair: (0,4)=1/2, error:0.00535 => f0 @ 2021.948242
Harmonic PeakPair: (0,5)=2/5, error:0.00866 => f0 @ 1005.590820
Harmonic PeakPair: (0,6)=1/4, error:0.00133 => f0 @ 2027.331543
Harmonic PeakPair: (0,7)=9/4, error:0.01303 => f0 @ 226.515106

My question is: how can I devise an algorithm that will correctly identify the above fundamental as ~1000Hz?

It is by no means guaranteed that there will be a higher concentration of values at ~1000 than at ~2000 or ~3000 etc. it isn't even guaranteed that there will be any entry ~1000. we could have ~5000 x one entry, ~4000 x three entries, ~3000 x 2 entries, and a couple of bogus values floating around, like the 226 in the above list.

I guess I can repeat the procedure again, weeding out suggested fundamentals which are not 'harmonic' with the rest of the list. this would at least get rid of the bogus values...

it may be that I'm not even asking the right question. Maybe this whole approach sucks. But I think it makes sense to pick the strongest peak and extract a set of harmonics associated with that peak.

in theory that should generate a load of ratios, say if how original strongest peak was the third harmonic, then this set of peaks should contain 3/1 3/2 3/3 3/4 3/5 3/6 3/7 etc ... although some may be missing.

realistically I have a feeling it's always going to be either a fundamental or the first harmonic that has the greatest strength. but I don't know if I can rely on this...

so many factors, it is making my head swim. I apologise in advance for such a messy question. Hopefully I can tidy it up posthumously.

A Cepstum (or Cepstral analysis) and Harmonic Product Spectrum are two well studied algorithms that estimate the exciter frequency from an overtone series.

If the sequences of overtones are appropriately spaced, than a Cepstrum (FFT of the log of the FFT peaks) may be useful in estimating the period of the frequency spacing, which can then be used to estimate the frequency.

The Harmonic Product Spectrum basically compares the spectral peaks with nth multiple copies of themselves by decimating the spectrum by multiple low integer ratios and overlapping them.

You can go through following link for an article on speech recognition.

Article: Phase Space Point Disribution Parameter for Speech Recognition (subscription required for full text)

I have rephrased the question, and provided an answer here: How to take in a set of numbers like {301,102,99,202,198,103} and throw out ~100?

I had looked at several approaches, and this is considerably more succinct than anything else I've found. I have tested it and it works very well.