Calculating bounding box a certain distance away from a lat/long coordinate in Java

Given a coordinate (lat, long), I am trying to calculate a square bounding box that is a given distance (e.g. 50km) away from the coordinate. So as input I have lat, long and distance and as output I would like two coordinates; one being the south-west (bottom-left) corner and one being the north-east (top-right) corner. I have seen a couple of answers on here that try to address this question in Python, but I am looking for a Java implementation in particular.

Just to be clear, I intend on using the algorithm on Earth only and so I don't need to accommodate a variable radius.

It doesn't have to be hugely accurate (+/-20% is fine) and it'll only be used to calculate bounding boxes over small distances (no more开发者_如何学C than 150km). So I'm happy to sacrifice some accuracy for an efficient algorithm. Any help is much appreciated.

Edit: I should have been clearer, I really am after a square, not a circle. I understand that the distance between the center of a square and various points along the square's perimeter is not a constant value like it is with a circle. I guess what I mean is a square where if you draw a line from the center to any one of the four points on the perimeter that results in a line perpendicular to a side of the perimeter, then those 4 lines have the same length.

---

I wrote an article about finding the bounding coordinates:

http://JanMatuschek.de/LatitudeLongitudeBoundingCoordinates

The article explains the formulae and also provides a Java implementation. (It also shows why IronMan's formula for the min/max longitude is inaccurate.)

---

double R = 6371;  // earth radius in km

double radius = 50; // km

double x1 = lon - Math.toDegrees(radius/R/Math.cos(Math.toRadians(lat)));

double x2 = lon + Math.toDegrees(radius/R/Math.cos(Math.toRadians(lat)));

double y1 = lat + Math.toDegrees(radius/R);

double y2 = lat - Math.toDegrees(radius/R);

Although I would also recommend JTS.

---

import com.vividsolutions.jts.geom.Envelope;

...
Envelope env = new Envelope(centerPoint.getCoordinate());
env.expandBy(distance_in_degrees); 
...

Now env contains your envelope. It's not actually a "square" (whatever that means on the surface of a sphere), but it should do.

You should note that the distance in degrees will depend on the latitude of the center point. At the equator, 1 degree of latitude is about 111km, but in New York, it's only about 75km.

The really cool thing is that you can toss all your points into a com.vividsolutions.jts.index.strtree.STRtree and then use it to quickly calculate points inside that Envelope.

---

All of the previous answers are only partially correct. Specially in region like Australia, they always include pole and calculate a very large rectangle even for 10kms.

Specially the algorithm by Jan Philip Matuschek at http://janmatuschek.de/LatitudeLongitudeBoundingCoordinates#UsingIndex included a very large rectangle from (-37, -90, -180, 180) for almost every point in Australia. This hits a large users in database and distance have to be calculated for all of the users in almost half the country.

I found that the Drupal API Earth Algorithm by Rochester Institute of Technology works better around pole as well as elsewhere and is much easier to implement.

https://www.rit.edu/drupal/api/drupal/sites%21all%21modules%21location%21earth.inc/7.54

Use earth_latitude_range and earth_longitude_range from the above algorithm for calculating bounding rectangle

Here is the implementation is Java

    /**
 * Get bouding rectangle using Drupal Earth Algorithm
 * @see https://www.rit.edu/drupal/api/drupal/sites%21all%21modules%21location%21earth.inc/7.54
 * @param lat
 * @param lng
 * @param distance
 * @return
 */
default BoundingRectangle getBoundingRectangleDrupalEarthAlgo(double lat, double lng, int distance) {
    lng = Math.toRadians(lng);
    lat = Math.toRadians(lat);
    double radius = earth_radius(lat);
    List<Double> retLats = earth_latitude_range(lat, radius, distance);
    List<Double> retLngs = earth_longitude_range(lat, lng, radius, distance);
    return new BoundingRectangle(retLats.get(0), retLats.get(1), retLngs.get(0), retLngs.get(1));
}


/**
 * Calculate latitude range based on earths radius at a given point
 * @param latitude
 * @param longitude
 * @param distance
 * @return
 */
default List<Double> earth_latitude_range(double lat, double radius, double distance) {
      // Estimate the min and max latitudes within distance of a given location.

      double angle = distance / radius;
      double minlat = lat - angle;
      double maxlat = lat + angle;
      double rightangle = Math.PI / 2;
      // Wrapped around the south pole.
      if (minlat < -rightangle) {
        double overshoot = -minlat - rightangle;
        minlat = -rightangle + overshoot;
        if (minlat > maxlat) {
          maxlat = minlat;
        }
        minlat = -rightangle;
      }
      // Wrapped around the north pole.
      if (maxlat > rightangle) {
        double overshoot = maxlat - rightangle;
        maxlat = rightangle - overshoot;
        if (maxlat < minlat) {
          minlat = maxlat;
        }
        maxlat = rightangle;
      }
      List<Double> ret = new ArrayList<>();
      ret.add((minlat));
      ret.add((maxlat));
      return ret;
    }

/**
 * Calculate longitude range based on earths radius at a given point
 * @param lat
 * @param lng
 * @param earth_radius
 * @param distance
 * @return
 */
default List<Double> earth_longitude_range(double lat, double lng, double earth_radius, int distance) {
      // Estimate the min and max longitudes within distance of a given location.
      double radius = earth_radius * Math.cos(lat);

      double angle;
      if (radius > 0) {
        angle = Math.abs(distance / radius);
        angle = Math.min(angle, Math.PI);
      }
      else {
        angle = Math.PI;
      }
      double minlong = lng - angle;
      double maxlong = lng + angle;
      if (minlong < -Math.PI) {
        minlong = minlong + Math.PI * 2;
      }
      if (maxlong > Math.PI) {
        maxlong = maxlong - Math.PI * 2;
      }

      List<Double> ret = new ArrayList<>();
      ret.add((minlong));
      ret.add((maxlong));
      return ret;
    }

/**
 * Calculate earth radius at given latitude
 * @param latitude
 * @return
 */
default Double earth_radius(double latitude) {
      // Estimate the Earth's radius at a given latitude.
      // Default to an approximate average radius for the United States.
      double lat = Math.toRadians(latitude);

      double x = Math.cos(lat) / 6378137.0;
      double y = Math.sin(lat) / (6378137.0 * (1 - (1 / 298.257223563)));

      //Make sure earth's radius is in km , not meters
      return (1 / (Math.sqrt(x * x + y * y)))/1000;
    }

And use the distance calculation formula documented by google maps to calculate distance

https://developers.google.com/maps/solutions/store-locator/clothing-store-locator#outputting-data-as-xml-using-php

To search by kilometers instead of miles, replace 3959 with 6371. For (Lat, Lng) = (37, -122) and a Markers table with columns lat and lng, the formula is:

SELECT id, ( 3959 * acos( cos( radians(37) ) * cos( radians( lat ) ) * cos( radians( lng ) - radians(-122) ) + sin( radians(37) ) * sin( radians( lat ) ) ) ) AS distance FROM markers HAVING distance < 25 ORDER BY distance LIMIT 0 , 20;

---

Based on IronMan response:

/**
 * Calculate the lat and len of a square around a point.
 * @return latMin, latMax, lngMin, lngMax
 */
public static double[] calculateSquareRadius(double lat, double lng, double radius) {
    double R = 6371;  // earth radius in km
    double latMin = lat - Math.toDegrees(radius/R);
    double latMax = lat + Math.toDegrees(radius/R);
    double lngMin = lng - Math.toDegrees(radius/R/Math.cos(Math.toRadians(lat)));
    double lngMax = lng + Math.toDegrees(radius/R/Math.cos(Math.toRadians(lat)));

    return new double[] {latMin, latMax, lngMin, lngMax};
}

---

Here is a simple solution that I used to generate bounding box coordinates that I use with GeoNames citieJSON API to get nearby big cities from a gps decimal coordinate.

This is a Java method from my GitHub repository: FusionTableModifyJava

I had a decimal GPS location and I needed to find the biggest city/state "near" that location. I needed a relatively accurate bounding box to pass to the citiesJSON GeoNames webservice to get back the biggest city in that bounding box. I pass the location and the "radius" I am interested in (in km) and it gives back the north, south, east, west decimal coordinates needed to pass to citiesJSON.

(I found these resources useful in doing my research:

Calculate distance, bearing and more between Latitude/Longitude points.

Longitude - Wikipedia)

It is not super accurate but accurate enough for what I was using it for:

    // Compute bounding Box coordinates for use with Geonames API.
    class BoundingBox
    {
        public double north, south, east, west;
        public BoundingBox(String location, float km)
        {
             //System.out.println(location + " : "+ km);
            String[] parts = location.replaceAll("\\s","").split(","); //remove spaces and split on ,

            double lat = Double.parseDouble(parts[0]);
            double lng = Double.parseDouble(parts[1]);

            double adjust = .008983112; // 1km in degrees at equator.
            //adjust = 0.008983152770714983; // 1km in degrees at equator.

            //System.out.println("deg: "+(1.0/40075.017)*360.0);


            north = lat + ( km * adjust);
            south = lat - ( km * adjust);

            double lngRatio = 1/Math.cos(Math.toRadians(lat)); //ratio for lng size
            //System.out.println("lngRatio: "+lngRatio);

            east = lng + (km * adjust) * lngRatio;
            west = lng - (km * adjust) * lngRatio;
        }

    }