How much is 32 kB of compiled code_问答_开发者

I am planning to use an Arduino programmable board. Those have quite limited flash memories ranging between 16 and 128 kB to store compiled C or C++ code.

Are there ways to est开发者_StackOverflow社区imate how much (standard) code it will represent ?

I suppose this is very vague, but I'm only looking for an order of magnitude.

The output of the size command is a good starting place, but does not give you all of the information you need.

$ avr-size program.elf
text            data    bss     dec     hex filename

The size of your image is usually a little bit more than the sum of the text and the data sections. The bss section is essentially compressed because it is all 0s. There may be other sections which are relevant which aren't listed by size.

If your build system is set up like ones that I've used before for AVR microcontrollers then you will end up with an *.elf file as well as a *.bin file, and possibly a *.hex file. The *.bin file is the actual image that would be stored in the program flash of the processor, so you can examine its size to determine how your program is growing as you make edits to it. The *.bin file is extracted from the *.elf file with the objdump command and some flags which I can't remember right now.

If you are wanting to know how to guess-timate how your much your C or C++ code will produce when compiled, this is a lot more difficult. I have observed a 10x blowup in a function when I tried to use a uint64_t rather than a uint32_t when all I was doing was incrementing it (this was about 5 times more code than I thought it would be). This was mostly to do with gcc's avr optimizations not being the best, but smaller changes in code size can creep in from seemingly innocent code.

This will likely be amplified with the use of C++, which tends to hide more things that turn into code than C does. Chief among the things C++ hides are destructor calls and lots of pointer dereferencing which has to do with the this pointer in objects as well as a secret pointer many objects have to their virtual function table and class static variables.

On AVR all of this pointer stuff is likely to really add up because pointers are twice as big as registers and take multiple instructions to load. Also AVR has only a few register pairs that can be used as pointers, which results in lots of moving things into and out of those registers.

Some tips for small programs on AVR:

Use uint8_t and int8_t instead of int whenever you can. You could also use uint_fast8_t and int_fast8_t if you want your code to be portable. This can lead to many operations taking up only half as much code, because int is two bytes.
Be very aware of things like string and struct constants and literals and how/where they are stored.
If you're not scared of it, read the AVR assembly manual. You can get an idea of the types of instructions, and from that the type of C code that easily maps to those instructions. Use that kind of C code.

You can't really say there. The length of the uncompiled code has little to do with the length of the compiled code. For example:

#include <iostream>
#include <vector>
#include <string>
#include <algorithm>

int main()
{
  std::vector<std::string> strings;
  strings.push_back("Hello");
  strings.push_back("World");
  std::sort(strings.begin(), strings.end());
  std::copy(strings.begin(), strings.end(), std::ostream_iterator<std::string>(std::cout, ""));
}

#include <iostream>
#include <vector>
#include <string>
#include <algorithm>

int main()
{
  std::vector<std::string> strings;
  strings.push_back("Hello");
  strings.push_back("World");
  for ( int idx = 0; idx < strings.size(); idx++ )
    std::cout << strings[idx];
}

Both are the exact same number of lines, and produce the same output, but the first example involves an instantiation of std::sort, which is probably an order of magnitude more code than the rest of the code here.

If you absolutely need to count number of bytes used in the program, use assembler.

Download the arduino IDE and 'verify' some of your existing code, or look at the sample sketches. It will tell you how many bytes that code is, which will give you an idea of how much more you can fit into a given device. Picking a couple of the examples at random, the web server example is 5816 bytes, and the LCD hello world is 2616. Both use external libraries.

Try creating a simplified version of your app, focusing on the most valuable feature first, then start adding up the 'nice (and cool) stuff to have'. Keep an eye on the byte usage shown in the Arduino IDE when you verify your code.

As a rough indication, my first app (LED flasher controlled by a push buttun) requires 1092 bytes. That`s roughly 1K out of 32k. Pretty small footprint for C++ code!

What worries me most is the limited amount of RAM (1 Kb). If the CPU stack takes some of it, then there isn`t much left for creating any data structures.

I only had my Arduino for 48 hrs, so there is still a lot to use it effectively ;-) But it's a lot of fun to use :).

It's quite a bit for a reasonably complex piece of software, but you will start bumping into the limit if you want it to have a lot of different functionality. Also, if you want to store quite a lot of static strings and data, it can eat into that quite quickly. But 32 KB is a decent amount for embedded applications. It tends to be RAM that you have problems with first!

Also, quite often the C++ compilers for embedded systems are a lot worse than the C compilers. That is, they are nowhere as good as C++ compilers for the common desktop OS's (in terms of producing efficient machine code for the target platform).

At a linux system you can do some experiments with static compiled example programs. E.g.

$ size `which busybox `
text            data    bss     dec     hex filename
1830468    4448   25650 1860566  1c63d6 /bin/busybox

The sizes are given in bytes. This output is independent from the executable file format, since the sizes of the different sections inside the file format. The text section contains the machine code and const stufff. The data section contains data for static initialization of variables. The bss size is the size of uninitialized data - of course uninitialized data does not need to be stored in the executable file.)

Well, busybox contains a lot of functionality (like all common shell commands, a shell etc.).

If you link own examples with gcc -static, keep in mind, that your used libc may dramatically increase the program size and that using an embedded libc may be much more space efficient.

To test that you can check out the diet-libc or uclibc and link against that. Actually, busybox is usually linked against uclibc.

Note that the sizes you get this way give you only an order of magnitude. For example, your workstation probably uses another CPU architecture than the arduino board and the machine code of different architecture may differ, more or less, in its size (because of operand sizes, available instructions, opcode encoding and so one).

To go on with rough order of magnitude reasoning, busybox contains roughly 309 tools (including ftp daemon and such stuff), i.e. the average code size of a busybox tool is roughly 5k.