Why does this LotusScript halt during a loop?

I am trying to write a LotusScript to control a motor. The script I have for reading the bits seem to work fine, but I wish to add a stop button. I have all the commands for making the device stop, but the trouble I'm having is that whenever LotusScript is running through a loop, I cannot click on any of the other buttons.

Does anyone know a way around this???

The scripts I am using are below.

Thank-you kindly.

Andy Barlow

Sub readpositionsub Dim send_string As String

Dim readString As String Dim tempString As String readString = ""

REM Sets the "movement" cell to 6 (the movement int)开发者_运维技巧
[b1].contents = "6"
Do While [b1].contents <> "7"

    readString = ""
    statusBitString = ""

    REM READ STATUS ===!!!===
    REM Open the handle to the motor
    handle =    init_RS232(19200)
    REM #1$ reads the status from the controller.
    send_string = "#1$"+Chr$(13)
    REM Ask the controller to store the results in bits
    resultStatus=write_RS232 (handle,send_string)

    REM Read Status by looping through all of the bits
    For n=0 To 8
        tempString = "*1234567"  
        sendReadCommand = read_RS232(handle,tempString)
        If Mid(tempString,1,1) = Chr$(13) Then
            Exit For
        Else
            statusBitString = statusBitString  + Mid(tempString,1,1)
        End If

    Next
    [b1].contents = Mid(statusBitString,7, 1)
    close_RS232(handle)
    REM End Read Status



    REM READ POSITION ===!!!===
    REM Open the handle to the motor
    handle =    init_RS232(19200)
    send_string = "#1C"+Chr$(13)
    t=write_RS232 (handle,send_string)  
    REM Reading Position
    For n=0 To 20
        tempString = "*1234567"  
        r = read_RS232(handle,tempString)
        If Mid(tempString,1,1) = Chr$(13) Then
            Exit For
        Else
            readString = readString + Mid(tempString,1,1)

        End If

    Next
    REM End Read Position
    [a1].contents=Mid(readString, 4)
    close_RS232(handle)

Loop

End Sub

And the stop button that should work should be... Object btnStop

Sub Click(Source As Buttoncontrol) REM initialise handle = init_RS232(19200)

REM Create the string for starting the motor
send_string = "#1S"+Chr$(13)

REM Send the string for starting the motor
resultStartMotor=write_RS232 (handle,send_string)

REM Close the spin handle
close_RS232(handle)

End Sub

---

You're not running your Lotusscript in a threaded environment, so how do you expect the code on a button to stop the code already running?

---

If you want to be able to cancel a loop you need to play with the timer object. Basically you start a time that executes one iteration of your loop. At the beginning you look for a changed field value or an ini variable to cancel the timer if set. Now you can use your button to set that variable. The loop will run much slower than without a timer (after all it has a wait interval you set)