Objective-C: autoreleased object as parameter for method

could the following code lead to problems?

- (void) method1 {
      NSMutableArray *myArray = [[[NSMutableArray alloc] init] autorelease];

      ... fill the array

      [someObject someMethod:myArray]; // someObject does work on that array (without retain!)
}

A sometimes-appearing crash in my app looks like it IS a problem; but I would not understand that... shouldn't myArray stay alive at least until the end of method1?

Thanks a lot for your help!

So my questions besides "can that be a problem" are: - would it be enough to remove autorelease and make a release at the end of the method? - if not: do I have to make a retain/release in "someMethod"?

EDIT: but this can be a problem, am I right?

- (void) method1 {
      NSMutableArray *myArray = [self getArray];

      ... fill the array

      [som开发者_Python百科eObject someMethod:myArray]; // someObject does work on that array (without retain!)
}

- (NSMutableArray) method2 {
      return [[[NSMutableArray alloc] init] autorelease];
}

---

I'm going to assume for a moment that you meant this to be NSMutableArray rather than NSArray. If you really mean NSArray here, then it is all impossible. You can't "fill the array" on an immutable array.

Yes, this should work. Your problem is likely elsewhere. A common mistake here would be over-releasing something you put into myArray.

---

Looks like you're missing a couple of open brackets on the line where you allocate your array. Should be [[[NSMutableArray alloc] init] autorelease];

---

Your code is completely correct. Do not listen to people telling you to remove the autorelease and manually release the array after the call to someMethod:.

In 99% of cases using an autorelease'd object has absolutely no negative performance impact on your application. The only time you want to worry about it is in loops.

The [[[Foo alloc] init] autorelease] pattern is just the same as using a built-in helper method like [NSString stringWithFormat:...]. They both return an autoreleased object, but you probably don't worry about performance with the latter. Again, only worry about autorelease in large loops, or when Instruments tells you you have a problem.

Using the [[[Foo alloc] init] autorelease] style also keeps all the memory management on a single line. If you get used to typing [[[ you won't forget the release. If you are copying and pasting code, or moving code around, you won't accidentally lose the corresponding release because it's all on the same line.

It's also easier to review code that uses the [[[Foo alloc] init] autorelease] style because you don't have to go around hunting for the release further down the method to make sure the memory management is correct.

So in terms of readability and safety and correctness, your code is absolutely fine and good. This applies to both your original snippet and the follow up you added below. Performance of autorelease only becomes an issue when you have large loops.

Your crashing issue must be caused by some other factor that is not evident in the code you posted.

I also suggest you read the Memory Management Programming Guideline if you have not already. Basically, and autorelease'd object is guaranteed to remain valid until the enclosing pool is released. In your case, the autorelease pool exists higher up in the call stack (probably the main runloop) so you can be safe in the knowledge that your autorelease'd array will remain valid for the duration of any calls you make.

One last point. Your array allocation code could also make use of the array helper constructor:

NSMutableArray *myArray = [NSMutableArray array];

This is even simpler, cleaner and shorter than your original.

---

Best thing to do will be something like that:

- (void) method1 {
      NSMutableArray *myArray = [[NSMutableArray alloc] init];

      ... fill the array

      [someObject someMethod:myArray]; // someObject does work on that array (without retain!)
      [myArray release];
}

and it's best from two different angles. One way you are holding your array till you have no need for it, so it will no wipe from memory until you say so. Second is the same sentence, only the reason is that you will clean up memory from no more needed objects as soon as it could be done.
The last may need some more explanation... Autoreleased objects should be autoreleased as soon as you have no need for it, but they are released on two basic rules: at the end of block(not always) or at the memory pressure after end of the block(yes always). In other words NSAutoreleasePool doesn't always release stuff at the end of some block of the code, and it's not even close to be rare that it delays those releases to later point.
Anyway you should always check for over-releasing your object as it will lead to crash when you'll try to reach such object at your code.