I sense that the Scala community has a little big obsession with writing "concise", "cool", "scala idiomatic", "one-liner" -if possible- code. This is immediately followed by a comparison to Java/imperative/ugly code.
While this (sometimes) leads to easy to understand code, it also leads to inefficient code for 99% of developers. And this is where Java/C++ is not easy to beat.
Consider this simple problem: Given a list of integers, remove the greatest element. Ordering does not need to be preserved.
Here is my version of the solution (It may not be the greatest, but it's what the average non-rockstar developer would do).
def removeMaxCool(xs: List[Int]) = {
val maxIndex = xs.indexOf(xs.max);
xs.take(maxIndex) ::: xs.drop(maxIndex+1)
}
It's Scala idiomatic, concise, and uses a few nice list functions. It's also very inefficient. It traverses the list at least 3 or 4 times.
Here is my totally uncool, Java-like solution. It's also what a reasonable Java developer (or Scala novice) would write.
def removeMaxFast(xs: List[Int]) = {
var res = ArrayBuffer[Int]()
var max = xs.head
var first = true;
for (x <- xs) {
if (first) {
first = false;
} else {
if (x > max) {
res.append(max)
max = x
} else {
res.append(x)
}
}
}
res.toList
}
Totally non-Scala idiomatic, non-functional, non-concise, but it's very efficient. It traverses the list only once!
开发者_高级运维So, if 99% of Java developers write more efficient code than 99% of Scala developers, this is a huge obstacle to cross for greater Scala adoption. Is there a way out of this trap?
I am looking for practical advice to avoid such "inefficiency traps" while keeping implementation clear ans concise.
Clarification: This question comes from a real-life scenario: I had to write a complex algorithm. First I wrote it in Scala, then I "had to" rewrite it in Java. The Java implementation was twice as long, and not that clear, but at the same time it was twice as fast. Rewriting the Scala code to be efficient would probably take some time and a somewhat deeper understanding of scala internal efficiencies (for vs. map vs. fold, etc)
Let's discuss a fallacy in the question:
So, if 99% of Java developers write more efficient code than 99% of Scala developers, this is a huge obstacle to cross for greater Scala adoption. Is there a way out of this trap?
This is presumed, with absolutely no evidence backing it up. If false, the question is moot.
Is there evidence to the contrary? Well, let's consider the question itself -- it doesn't prove anything, but shows things are not that clear.
Totally non-Scala idiomatic, non-functional, non-concise, but it's very efficient. It traverses the list only once!
Of the four claims in the first sentence, the first three are true, and the fourth, as shown by user unknown, is false! And why it is false? Because, contrary to what the second sentence states, it traverses the list more than once.
The code calls the following methods on it:
res.append(max)
res.append(x)
and
res.toList
Let's consider first append.
appendtakes a vararg parameter. That meansmaxandxare first encapsulated into a sequence of some type (aWrappedArray, in fact), and then passed as parameter. A better method would have been+=.Ok,
appendcalls++=, which delegates to+=. But, first, it callsensureSize, which is the second mistake (+=calls that too --++=just optimizes that for multiple elements). Because anArrayis a fixed size collection, which means that, at each resize, the wholeArraymust be copied!
So let's consider this. When you resize, Java first clears the memory by storing 0 in each element, then Scala copies each element of the previous array over to the new array. Since size doubles each time, this happens log(n) times, with the number of elements being copied increasing each time it happens.
Take for example n = 16. It does this four times, copying 1, 2, 4 and 8 elements respectively. Since Java has to clear each of these arrays, and each element must be read and written, each element copied represents 4 traversals of an element. Adding all we have (n - 1) * 4, or, roughly, 4 traversals of the complete list. If you count read and write as a single pass, as people often erroneously do, then it's still three traversals.
One can improve on this by initializing the ArrayBuffer with an initial size equal to the list that will be read, minus one, since we'll be discarding one element. To get this size, we need to traverse the list once, though.
Now let's consider toList. To put it simply, it traverses the whole list to create a new list.
So, we have 1 traversal for the algorithm, 3 or 4 traversals for resize, and 1 additional traversal for toList. That's 4 or 5 traversals.
The original algorithm is a bit difficult to analyse, because take, drop and ::: traverse a variable number of elements. Adding all together, however, it does the equivalent of 3 traversals. If splitAt was used, it would be reduced to 2 traversals. With 2 more traversals to get the maximum, we get 5 traversals -- the same number as the non-functional, non-concise algorithm!
So, let's consider improvements.
On the imperative algorithm, if one uses ListBuffer and +=, then all methods are constant-time, which reduces it to a single traversal.
On the functional algorithm, it could be rewritten as:
val max = xs.max
val (before, _ :: after) = xs span (max !=)
before ::: after
That reduces it to a worst case of three traversals. Of course, there are other alternatives presented, based on recursion or fold, that solve it in one traversal.
And, most interesting of all, all of these algorithms are O(n), and the only one which almost incurred (accidentally) in worst complexity was the imperative one (because of array copying). On the other hand, the cache characteristics of the imperative one might well make it faster, because the data is contiguous in memory. That, however, is unrelated to either big-Oh or functional vs imperative, and it is just a matter of the data structures that were chosen.
So, if we actually go to the trouble of benchmarking, analyzing the results, considering performance of methods, and looking into ways of optimizing it, then we can find faster ways to do this in an imperative manner than in a functional manner.
But all this effort is very different from saying the average Java programmer code will be faster than the average Scala programmer code -- if the question is an example, that is simply false. And even discounting the question, we have seen no evidence that the fundamental premise of the question is true.
EDIT
First, let me restate my point, because it seems I wasn't clear. My point is that the code the average Java programmer writes may seem to be more efficient, but actually isn't. Or, put another way, traditional Java style doesn't gain you performance -- only hard work does, be it Java or Scala.
Next, I have a benchmark and results too, including almost all solutions suggested. Two interesting points about it:
Depending on list size, the creation of objects can have a bigger impact than multiple traversals of the list. The original functional code by Adrian takes advantage of the fact that lists are persistent data structures by not copying the elements right of the maximum element at all. If a
Vectorwas used instead, both left and right sides would be mostly unchanged, which might lead to even better performance.Even though user unknown and paradigmatic have similar recursive solutions, paradigmatic's is way faster. The reason for that is that he avoids pattern matching. Pattern matching can be really slow.
The benchmark code is here, and the results are here.
def removeOneMax (xs: List [Int]) : List [Int] = xs match {
case x :: Nil => Nil
case a :: b :: xs => if (a < b) a :: removeOneMax (b :: xs) else b :: removeOneMax (a :: xs)
case Nil => Nil
}
Here is a recursive method, which only iterates once. If you need performance, you have to think about it, if not, not.
You can make it tail-recursive in the standard way: giving an extra parameter carry, which is per default the empty List, and collects the result while iterating. That is, of course, a bit longer, but if you need performance, you have to pay for it:
import annotation.tailrec
@tailrec
def removeOneMax (xs: List [Int], carry: List [Int] = List.empty) : List [Int] = xs match {
case a :: b :: xs => if (a < b) removeOneMax (b :: xs, a :: carry) else removeOneMax (a :: xs, b :: carry)
case x :: Nil => carry
case Nil => Nil
}
I don't know what the chances are, that later compilers will improve slower map-calls to be as fast as while-loops. However: You rarely need high speed solutions, but if you need them often, you will learn them fast.
Do you know how big your collection has to be, to use a whole second for your solution on your machine?
As oneliner, similar to Daniel C. Sobrals solution:
((Nil : List[Int], xs(0)) /: xs.tail) ((p, x)=> if (p._2 > x) (x :: p._1, p._2) else ((p._2 :: p._1), x))._1
but that is hard to read, and I didn't measure the effective performance. The normal pattern is (x /: xs) ((a, b) => /* something */). Here, x and a are pairs of List-so-far and max-so-far, which solves the problem to bring everything into one line of code, but isn't very readable. However, you can earn reputation on CodeGolf this way, and maybe someone likes to make a performance measurement.
And now to our big surprise, some measurements:
An updated timing-method, to get the garbage collection out of the way, and have the hotspot-compiler warm up, a main, and many methods from this thread, together in an Object named
object PerfRemMax {
def timed (name: String, xs: List [Int]) (f: List [Int] => List [Int]) = {
val a = System.currentTimeMillis
val res = f (xs)
val z = System.currentTimeMillis
val delta = z-a
println (name + ": " + (delta / 1000.0))
res
}
def main (args: Array [String]) : Unit = {
val n = args(0).toInt
val funs : List [(String, List[Int] => List[Int])] = List (
"indexOf/take-drop" -> adrian1 _,
"arraybuf" -> adrian2 _, /* out of memory */
"paradigmatic1" -> pm1 _, /**/
"paradigmatic2" -> pm2 _,
// "match" -> uu1 _, /*oom*/
"tailrec match" -> uu2 _,
"foldLeft" -> uu3 _,
"buf-=buf.max" -> soc1 _,
"for/yield" -> soc2 _,
"splitAt" -> daniel1,
"ListBuffer" -> daniel2
)
val r = util.Random
val xs = (for (x <- 1 to n) yield r.nextInt (n)).toList
// With 1 Mio. as param, it starts with 100 000, 200k, 300k, ... 1Mio. cases.
// a) warmup
// b) look, where the process gets linear to size
funs.foreach (f => {
(1 to 10) foreach (i => {
timed (f._1, xs.take (n/10 * i)) (f._2)
compat.Platform.collectGarbage
});
println ()
})
}
I renamed all the methods, and had to modify uu2 a bit, to fit to the common method declaration (List [Int] => List [Int]).
From the long result, i only provide the output for 1M invocations:
scala -Dserver PerfRemMax 2000000
indexOf/take-drop: 0.882
arraybuf: 1.681
paradigmatic1: 0.55
paradigmatic2: 1.13
tailrec match: 0.812
foldLeft: 1.054
buf-=buf.max: 1.185
for/yield: 0.725
splitAt: 1.127
ListBuffer: 0.61
The numbers aren't completly stable, depending on the sample size, and a bit varying from run to run. For example, for 100k to 1M runs, in steps of 100k, the timing for splitAt was as follows:
splitAt: 0.109
splitAt: 0.118
splitAt: 0.129
splitAt: 0.139
splitAt: 0.157
splitAt: 0.166
splitAt: 0.749
splitAt: 0.752
splitAt: 1.444
splitAt: 1.127
The initial solution is already pretty fast. splitAt is a modification from Daniel, often faster, but not always.
The measurement was done on a single core 2Ghz Centrino, running xUbuntu Linux, Scala-2.8 with Sun-Java-1.6 (desktop).
The two lessons for me are:
- always measure your performance improvements; it is very hard to estimate it, if you don't do it on a daily basis
- it is not only fun, to write functional code - sometimes the result is even faster
Here is a link to my benchmarkcode, if somebody is interested.
First of all, the behavior of the methods you presented is not the same. The first one keeps the element ordering, while the second one doesn't.
Second, among all the possible solution which could be qualified as "idiomatic", some are more efficient than others. Staying very close to your example, you can for instance use tail-recursion to eliminate variables and manual state management:
def removeMax1( xs: List[Int] ) = {
def rec( max: Int, rest: List[Int], result: List[Int]): List[Int] = {
if( rest.isEmpty ) result
else if( rest.head > max ) rec( rest.head, rest.tail, max :: result)
else rec( max, rest.tail, rest.head :: result )
}
rec( xs.head, xs.tail, List() )
}
or fold the list:
def removeMax2( xs: List[Int] ) = {
val result = xs.tail.foldLeft( xs.head -> List[Int]() ) {
(acc,x) =>
val (max,res) = acc
if( x > max ) x -> ( max :: res )
else max -> ( x :: res )
}
result._2
}
If you want to keep the original insertion order, you can (at the expense of having two passes, rather than one) without any effort write something like:
def removeMax3( xs: List[Int] ) = {
val max = xs.max
xs.filterNot( _ == max )
}
which is more clear than your first example.
The biggest inefficiency when you're writing a program is worrying about the wrong things. This is usually the wrong thing to worry about. Why?
Developer time is generally much more expensive than CPU time — in fact, there is usually a dearth of the former and a surplus of the latter.
Most code does not need to be very efficient because it will never be running on million-item datasets multiple times every second.
Most code does need to bug free, and less code is less room for bugs to hide.
The example you gave is not very functional, actually. Here's what you are doing:
// Given a list of Int
def removeMaxCool(xs: List[Int]): List[Int] = {
// Find the index of the biggest Int
val maxIndex = xs.indexOf(xs.max);
// Then take the ints before and after it, and then concatenate then
xs.take(maxIndex) ::: xs.drop(maxIndex+1)
}
Mind you, it is not bad, but you know when functional code is at its best when it describes what you want, instead of how you want it. As a minor criticism, if you used splitAt instead of take and drop you could improve it slightly.
Another way of doing it is this:
def removeMaxCool(xs: List[Int]): List[Int] = {
// the result is the folding of the tail over the head
// and an empty list
xs.tail.foldLeft(xs.head -> List[Int]()) {
// Where the accumulated list is increased by the
// lesser of the current element and the accumulated
// element, and the accumulated element is the maximum between them
case ((max, ys), x) =>
if (x > max) (x, max :: ys)
else (max, x :: ys)
// and of which we return only the accumulated list
}._2
}
Now, let's discuss the main issue. Is this code slower than the Java one? Most certainly! Is the Java code slower than a C equivalent? You can bet it is, JIT or no JIT. And if you write it directly in assembler, you can make it even faster!
But the cost of that speed is that you get more bugs, you spend more time trying to understand the code to debug it, and you have less visibility of what the overall program is doing as opposed to what a little piece of code is doing -- which might result in performance problems of its own.
So my answer is simple: if you think the speed penalty of programming in Scala is not worth the gains it brings, you should program in assembler. If you think I'm being radical, then I counter that you just chose the familiar as being the "ideal" trade off.
Do I think performance doesn't matter? Not at all! I think one of the main advantages of Scala is leveraging gains often found in dynamically typed languages with the performance of a statically typed language! Performance matters, algorithm complexity matters a lot, and constant costs matters too.
But, whenever there is a choice between performance and readability and maintainability, the latter is preferable. Sure, if performance must be improved, then there isn't a choice: you have to sacrifice something to it. And if there's no lost in readability/maintainability -- such as Scala vs dynamically typed languages -- sure, go for performance.
Lastly, to gain performance out of functional programming you have to know functional algorithms and data structures. Sure, 99% of Java programmers with 5-10 years experience will beat the performance of 99% of Scala programmers with 6 months experience. The same was true for imperative programming vs object oriented programming a couple of decades ago, and history shows it didn't matter.
EDIT
As a side note, your "fast" algorithm suffer from a serious problem: you use ArrayBuffer. That collection does not have constant time append, and has linear time toList. If you use ListBuffer instead, you get constant time append and toList.
For reference, here's how splitAt is defined in TraversableLike in the Scala standard library,
def splitAt(n: Int): (Repr, Repr) = {
val l, r = newBuilder
l.sizeHintBounded(n, this)
if (n >= 0) r.sizeHint(this, -n)
var i = 0
for (x <- this) {
(if (i < n) l else r) += x
i += 1
}
(l.result, r.result)
}
It's not unlike your example code of what a Java programmer might come up with.
I like Scala because, where performance matters, mutability is a reasonable way to go. The collections library is a great example; especially how it hides this mutability behind a functional interface.
Where performance isn't as important, such as some application code, the higher order functions in Scala's library allow great expressivity and programmer efficiency.
Out of curiosity, I picked an arbitrary large file in the Scala compiler (scala.tools.nsc.typechecker.Typers.scala) and counted something like 37 for loops, 11 while loops, 6 concatenations (++), and 1 fold (it happens to be a foldRight).
What about this?
def removeMax(xs: List[Int]) = {
val buf = xs.toBuffer
buf -= (buf.max)
}
A bit more ugly, but faster:
def removeMax(xs: List[Int]) = {
var max = xs.head
for ( x <- xs.tail )
yield {
if (x > max) { val result = max; max = x; result}
else x
}
}
Try this:
(myList.foldLeft((List[Int](), None: Option[Int]))) {
case ((_, None), x) => (List(), Some(x))
case ((Nil, Some(m), x) => (List(Math.min(x, m)), Some(Math.max(x, m))
case ((l, Some(m), x) => (Math.min(x, m) :: l, Some(Math.max(x, m))
})._1
Idiomatic, functional, traverses only once. Maybe somewhat cryptic if you are not used to functional-programming idioms.
Let's try to explain what is happening here. I will try to make it as simple as possible, lacking some rigor.
A fold is an operation on a List[A] (that is, a list that contains elements of type A) that will take an initial state s0: S (that is, an instance of a type S) and a function f: (S, A) => S (that is, a function that takes the current state and an element from the list, and gives the next state, ie, it updates the state according to the next element).
The operation will then iterate over the elements of the list, using each one to update the state according to the given function. In Java, it would be something like:
interface Function<T, R> { R apply(T t); }
class Pair<A, B> { ... }
<State> State fold(List<A> list, State s0, Function<Pair<A, State>, State> f) {
State s = s0;
for (A a: list) {
s = f.apply(new Pair<A, State>(a, s));
}
return s;
}
For example, if you want to add all the elements of a List[Int], the state would be the partial sum, that would have to be initialized to 0, and the new state produced by a function would simply add the current state to the current element being processed:
myList.fold(0)((partialSum, element) => partialSum + element)
Try to write a fold to multiply the elements of a list, then another one to find extreme values (max, min).
Now, the fold presented above is a bit more complex, since the state is composed of the new list being created along with the maximum element found so far. The function that updates the state is more or less straightforward once you grasp these concepts. It simply puts into the new list the minimum between the current maximum and the current element, while the other value goes to the current maximum of the updated state.
What is a bit more complex than to understand this (if you have no FP background) is to come up with this solution. However, this is only to show you that it exists, can be done. It's just a completely different mindset.
EDIT: As you see, the first and second case in the solution I proposed are used to setup the fold. It is equivalent to what you see in other answers when they do xs.tail.fold((xs.head, ...)) {...}. Note that the solutions proposed until now using xs.tail/xs.head don't cover the case in which xs is List(), and will throw an exception. The solution above will return List() instead. Since you didn't specify the behavior of the function on empty lists, both are valid.
Another option would be:
package code.array
object SliceArrays {
def main(args: Array[String]): Unit = {
println(removeMaxCool(Vector(1,2,3,100,12,23,44)))
}
def removeMaxCool(xs: Vector[Int]) = xs.filter(_ < xs.max)
}
Using Vector instead of List, the reason is that Vector is more versatile and has a better general performance and time complexity if compared to List.
Consider the following collections operations: head, tail, apply, update, prepend, append
Vector takes an amortized constant time for all operations, as per Scala docs: "The operation takes effectively constant time, but this might depend on some assumptions such as maximum length of a vector or distribution of hash keys"
While List takes constant time only for head, tail and prepend operations.
Using
scalac -print
generates:
package code.array {
object SliceArrays extends Object {
def main(args: Array[String]): Unit = scala.Predef.println(SliceArrays.this.removeMaxCool(scala.`package`.Vector().apply(scala.Predef.wrapIntArray(Array[Int]{1, 2, 3, 100, 12, 23, 44})).$asInstanceOf[scala.collection.immutable.Vector]()));
def removeMaxCool(xs: scala.collection.immutable.Vector): scala.collection.immutable.Vector = xs.filter({
((x$1: Int) => SliceArrays.this.$anonfun$removeMaxCool$1(xs, x$1))
}).$asInstanceOf[scala.collection.immutable.Vector]();
final <artifact> private[this] def $anonfun$removeMaxCool$1(xs$1: scala.collection.immutable.Vector, x$1: Int): Boolean = x$1.<(scala.Int.unbox(xs$1.max(scala.math.Ordering$Int)));
def <init>(): code.array.SliceArrays.type = {
SliceArrays.super.<init>();
()
}
}
}
Another contender. This uses a ListBuffer, like Daniel's second offering, but shares the post-max tail of the original list, avoiding copying it.
def shareTail(xs: List[Int]): List[Int] = {
var res = ListBuffer[Int]()
var maxTail = xs
var first = true;
var x = xs
while ( x != Nil ) {
if (x.head > maxTail.head) {
while (!(maxTail.head == x.head)) {
res += maxTail.head
maxTail = maxTail.tail
}
}
x = x.tail
}
res.prependToList(maxTail.tail)
}
![Interactive visualization of a graph in python [closed]](https://www.devze.com/res/2023/04-10/09/92d32fe8c0d22fb96bd6f6e8b7d1f457.gif)
加载中,请稍侯......
精彩评论