I'm using scapy, and I wa开发者_如何转开发nt to create a packet and calculate its' checksum without sending it. Is there a way to do it?
Thanks.
I've also tried to avoid show2() because it print the packet. I've found in the source a better solution:
del packet.chksum
packet = packet.__class__(bytes(packet))
This code regenerate the packet with the correct checksum without any print and actually is what show2() run in the background before printing.
You need to delete the .chksum
value from the packet after you create it; then call .show2()
>>> from scapy.layers.inet import IP
>>> from scapy.layers.inet import ICMP
>>> from scapy.layers.inet import TCP
>>> target = "10.9.8.7"
>>> ttl = 64
>>> id = 32711
>>> sport = 2927
>>> dport = 80
>>> pak = IP(dst=target, src = "100.99.98.97", ttl=ttl, flags="DF", id=id, len=1200, chksum = 0)/TCP(flags="S", sport=sport, dport=int(dport), options=[('Timestamp',(0,0))], chksum = 0)
>>> del pak[IP].chksum
>>> del pak[TCP].chksum
>>> pak.show2()
###[ IP ]###
version = 4L
ihl = 5L
tos = 0x0
len = 1200
id = 32711
flags = DF
frag = 0L
ttl = 64
proto = tcp
chksum = 0x9afd
src = 100.99.98.97
dst = 10.9.8.7
\options \
###[ TCP ]###
sport = 2927
dport = www
seq = 0
ack = 0
dataofs = 8L
reserved = 0L
flags = S
window = 8192
chksum = 0x2c0e
urgptr = 0
options = [('Timestamp', (0, 0)), ('EOL', None)]
>>>
Add this patch to scapy/packet.py:
+ def checksum_silent(self):
+ """
+ Internal method that recalcs checksum without the annoying prints
+ **AFTER old checksums are deleted.**
+ """
+
+ for f in self.fields_desc:
+ if isinstance(f, ConditionalField) and not f._evalcond(self):
+ continue
+ fvalue = self.getfieldval(f.name)
+ if isinstance(fvalue, Packet) or (f.islist and f.holds_packets and type(fvalue) is list):
+ fvalue_gen = SetGen(fvalue,_iterpacket=0)
+ for fvalue in fvalue_gen:
+ fvalue.checksum_silent()
+ if self.payload:
+ self.payload.checksum_silent()
Then instead of calling pkt.show2()
, just call this function
pkt.checksum_silent()
. (Remember to first do del pkt[IP].chksum
and del pkt[UDP].chksum
, etc.) as shown in the previous answer.
This function should be faster and be silent. (There may be additional things to trim as well; I hacked this code together and only tested to make sure it was silent with correct checksum.)
Indeed, the show2()
function calculates the checksum for you, but it also prints the contents of the packet once it is finished with its work. However, show2()
has a helpful little parameter named dump
. The source describes it as such:
:param dump: determine if it prints or returns the string value
So by setting dump=True
, you can avoid the pesky output that the function provides by default, and still get the calculations that you want.
You can also use packet.build()
which returns raw bytes with correct checksum. Then convert the bytes to a packet.
>>> import scapy.all as sp
>>> packet = sp.IP(src='127.0.0.1', dst='8.8.8.8')
>>> packet
<IP src=127.0.0.1 dst=8.8.8.8 |>
>>> sp.IP(packet.build())
<IP version=4 ihl=5 tos=0x0 len=20 id=1 flags= frag=0 ttl=64
proto=hopopt chksum=0xebd8 src=127.0.0.1 dst=8.8.8.8 |>
精彩评论