Finding Relevant Peaks in Messy FFTs

I have FFT outputs that look like this:

At 523 Hz is the maximum value. However, being a messy FFT, there are lots of little peaks that are right near the large peaks. However, they're irrelevant, whereas the peaks shown aren't. Are the any algorithms I can use to extract the maxima of this FFT that matter; I.E., aren't just random peaks cropping up near "real" peaks? Perhaps there is some sort of filter I can apply to this FFT output?

EDIT: The context of this is that I am trying to take one-hit sound samples (like someone pressing a key on a piano) and extract 开发者_运维问答the loudest partials. In the image below, the peaks above 2000 Hz are important, because they are discrete partials of the given sound (which happens to be a sort of bell). However, the peaks that are scattered about right near 523 seem to be just artifacts, and I want to ignore them.

---

If the peak is broad, it could indicate that the peak frequency is modulated (AM, FM or both), or is actually a composite of several spectral peaks, themselves each potentially modulated.

For instance, a piano note may be the result of the hammer hitting up to 3 strings that are all tuned just a tiny fraction differently, and they all can modulate as they exchange energy between strings though the piano frame. Guitar strings can change frequency as the pluck shape distortion smooths out and decays. Bells change shape after they are hit, which can modulate their spectrum. Etc.

If the sound itself is "messy" then you need a good definition of what you mean by the "real" peak, before applying any sort of smoothing or side-band rejection filter. e.g. All that "messiness" may be part of what makes a bell sound like a real bell instead of an electronic sinewave generator.

---

Try convolving your FFT (treating it as a signal) with a rectangular pulse( pulse = ones(1:20)/20; ). This might get rid of some of them. Your maxima will be shifted by 10 frequency bins to teh right, to take that into account. You would basically be integrating your signal. Similar techniques are used in Pan-Tompkins algorithm for heart beat identification.

---

I worked on a similar problem once, and choosed to use savitsky-golay filters for smoothing the spectrum data. I could get some significant peaks, and it didn't messed too much with the overall spectrum. But I Had a problem with what hotpaw2 is alerting you, I have lost important characteristics along with the lost of "messiness", so I truly recommend you hear him. But, if you think you won't have a problem with that, I think savitsky-golay can help.

---

There are non-FFT methods for creating a frequency domain representation of time domain data which are better for noisy data sets, like Max-ent recontruction.

For noisy time-series data, a max-ent reconstruction will be capable of distinguising true peaks from noise very effectively (without adding any artifacts or other modifications to suppress noise).

Max ent works by "guessing" an FFT for a time domain specturm, and then doing an IFT, and comparing the results with the "actual" time-series data, iteratively. The final output of maxent is a frequency domain spectrum (like the one you show above).

There are implementations in java i believe for 1-d spectra, but I have never used one.